BNRCX - ABLEBOND 62-4NA
- MSDS: BNRCX
- Manufacturer: ABLESTIK LABORATORIES
- Product Name: ABLEBOND 62-4NA
- National Stock Number: 8040-00N040182
Product Identification
Product ID:ABLEBOND 62-4NA
MSDS Date:07/23/1986
FSC:8040
NIIN:00N040182
MSDS Number: BNRCX
Responsible Party
RANCHO DOMINGUEZ, CA 90221
US
Emergency Phone: 213-764-4600
Info Phone: 213-764-4600
Preparer: STELLA JOU
Cage: 9V874
Contractor
Telephone: 310-764-4600
Cage: 21109
Ingredients
TRIETHYLENETETRAMINE; (ALIPHATIC AMINE)
CAS: 112-24-3
RTECS: YE6650000
Fraction By Weight: <10%
Hazards
LD50 LC50 Mixture:LD50:(ORAL,RAT)2500 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL: MAY BE HARMFUL IF
INHALED. VAPORS ARE IRRITATING & MAY CAUSE NAUSEA & VOMITING. SKIN:
CAN CAUSE CHEMICAL BURNS. CAN CAUSE DERMATITIS & SENSITIZATION. MAY
BE ABSORBED THRU SKIN. EYES: CAN CAUSE CHEMICAL BURNS. A STRONG
SENSITIZER. INGEST: MOD TOXIC. MAY CAUSE NAUS & VOMIT.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: CHRONIC: NOT AVAILABLE.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYE: FLUSH WITH WATER FOR AT LEAST 15 MIN. SEEK MED ATTN.
SKIN: WASH IMMED WITH SOAP AND WATER. IF IRRITATION PERSISTS, SEEK
MED ATTN. INHAL: REMOVE TO FRESH AIR IMMED. INGEST: SEEK MED ATTN
IMMED, AN D SHOW INSERT CARD.
Fire Fighting
Flash Point Method:COC
Flash Point:290F,143C
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.
Accidental Release
Spill Release Procedures:WIPE UP WITH SOLVENT SATURATED TOWELING AND
COLLECT IN AN APPROPRIATE CONTAINER FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:AVOID CONTACT WITH SKIN, EYES AND
CLOTHING. AVOID INHALATION OF VAPORS. KEEP FROZEN @ -40F OR COLDER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED ORGANIC VAPOR RESPIRATOR
IF NEEDED.
Ventilation:USE W/ADEQ VENT. LOC EXHAUST IS RECOM WHEN APPROP TO
CONTROL EMPLOYEE'S EXPOSURE. VENT CURING OVEN TO OUTDOORS.
Protective Gloves:RUBBER.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PROTECTIVE EQUIPMENT TO COVER EXPOSED AREAS.
Work Hygienic Practices:GOOD HOUSEKEEPING IS REQUIRED.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Vapor Density:5.0
Spec Gravity:1.45
Evaporation Rate & Reference:<0.001(BUTYL ACETATE=1)
Solubility in Water:<10
Appearance and Odor:TAN-GREY PASTE; SLIGHT AMMONIACAL ODOR.
Percent Volatiles by Volume:NIL
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG LEWIS OR MINERAL ACIDS.
Stability Condition to Avoid:EXCESSIVE HEAT AND HEATING QUANTITIES
GREATER THAN 100 GRAMS.
Hazardous Decomposition Products:AMMONIA, NO*X, CO, ALDEHYDES, & ACIDS
FROM INCOMPLETE COMBUSTION.
Disposal
Waste Disposal Methods:DISPOSE IN APPROVED CHEMICAL DISPOSAL AREA OR IN
A MANNER WHICH COMPLIES WITH ALL LOCAL, STATE AND FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.